在线浏览, 第3页, 索尼 Sony MEX-1GP 安装手册

1 2 3 182 mm 53 mm    Dashboard A TOYOTA to dashboard/centre console Bracket Bracket B NISSAN   to dashboard/centre console Bracket Bracket   Existing parts supplied with your car A B 1 2    max. size 5 × 8 mm max. size 5 × 8 mm max. size 5 × 8 mm max. size 5 × 8 mm     Face the hook inwards. Claws How to detach and attach the front panel Before installing the unit, detach the front panel. -A To detach Before detaching the front panel, be sure to press . Press , then slide the front panel to the right, and gently pull out the left end of the front panel. -B To attach Place the hole  of the front panel onto the spindle  on the unit, then lightly push the left side in. Warning if your car’s ignition has no ACC position After turning the ignition off, be sure to press and hold  on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. RESET button When the installation and connections are completed, be sure to press the RESET button with a ballpoint pen, etc., after detaching the front panel. Precautions • Choose the installation location carefully so that the unit will not interfere with normal driving operations. • Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near heater ducts. • Use only the supplied mounting hardware for a safe and secure installation. Mounting angle adjustment Adjust the mounting angle to less than 45°. Removing the protection collar and the bracket Before installing the unit, remove the protection collar  and the bracket  from the unit. 1 Remove the protection collar .  Engage the release keys  together with the protection collar  .  Pull out the release keys  to remove the protection collar  . 2 Remove the bracket .  Insert both release keys  together between the unit and the bracket  until they click.  Pull down the bracket  , then pull up the unit to separate. Mounting example Installation in the dashboard Notes • Bend these claws outward for a tight fi t, if necessary ( -2). • Make sure that the 4 catches on the protection collar  are properly engaged in the slots of the unit ( -3). Mounting the unit in a Japanese car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Note To prevent malfunction, install only with the supplied screws . Orient the release key correctly. Existing parts supplied with your car Fire wall   1 2 A B  • • •   1        2       •  •     (OFF) (OPEN)    