在线浏览, 第2页, 索尼 Sony MEX-1GP 安装手册

( -A) • • -B-   • •     • •  L R AUDIO OUT FRONT BUS CONTROL IN REMOTE IN 2 4 5 6 7 1 3 AUDIO OUT REAR AUDIO OUT FRONT BUS AUDIO IN BUS AUDIO IN /AUX IN * 2 AUDIO OUT REAR * 3 © 2006 Sony Corporation Printed in Thailand 2-661-372-31 (1) Cautions • This unit is designed for negative earth 12 V DC operation only. • Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). • Before making connections, turn the car ignition off to avoid short circuits. • Connect the yellow and red power input leads only after all other leads have been connected. • Run all earth leads to a common earth point. • Be sure to in su late any loose un con nect ed leads with electrical tape for safety. Notes on the power supply lead (yellow) • When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse. • When no car circuits are rated high enough, connect the unit directly to the battery. Parts Iist • The numbers in the list are keyed to those in the instructions. • The bracket  and the protection collar  are attached to the unit before shipping. Before mounting the unit, use the release keys  to remove the bracket  and the protection collar  from the unit. For details, see “Removing the protection collar and the bracket ( )” on the reverse side of the sheet. • Keep the release keys  for future use as they are also necessary if you remove the unit from your car. Caution Handle the bracket  carefully to avoid injuring your fi ngers. Catch  Note Before installing, make sure that the catches on both sides of the bracket  are bent inwards 2 mm. If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Installation/Connections Network Audio System Connection example Notes ( -A) • Be sure to connect the earth lead before connecting the amplifi er. • The alarm will only sound if the built-in amplifi er is used. Tip ( -B- ) For connecting two or more CD/MD changers, the source selector XA-C40 (not supplied) is necessary. Connection diagram  To a metal surface of the car First connect the black earth lead, then connect the orange/ white stripped, yellow, and red power input leads.  To the power aerial control lead or power supply lead of aerial booster amplifi er Notes • It is not necessary to connect this lead if there is no power aerial or aerial booster, or with a manually-operated telescopic aerial. • When your car has a built-in FM/AM aerial in the rear/side glass, see “Notes on the control and power supply leads.”  To AMP REMOTE IN of an optional power amplifi er This connection is only for amplifi ers. Connecting any other system may damage the unit.  To the interface cable of a car telephone  To a car’s illumination signal Be sure to connect the black earth lead to a metal surface of the car fi rst.  To the +12 V power terminal which is energized in the accessory position of the ignition key switch Notes • If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black earth lead to a metal surface of the car fi rst. • When your car has a built-in FM/AM aerial in the rear/side glass, see “Notes on the control and power supply leads.”  To the +12 V power terminal which is energized at all times Be sure to connect the black earth lead to a metal surface of the car fi rst. AUDIO OUT FRONT AUDIO OUT REAR * BUS AUDIO IN BUS CONTROL IN A B Equipment used in illustrations (not supplied) from car aerial Rear speaker Front speaker Active subwoofer Rotary commander RM-X4S Power amplifi er     × 2  × 4   CD/MD changer BUS AUDIO IN BUS CONTROL IN Source selector* * XA-C40 * not supplied • • • • • • • • • •       •     * 1 RCA pin cord (not supplied) * 2 Be sure to match the colour-coded cord for audio to the appropriate jacks from the unit. If you connect an optional CD/MD changer, you cannot use AUX IN terminal. * 3 AUDIO OUT can be switched SUB or REAR. For details, see the Operating Instructions. * 4 Auxiliary optional equipment such as portable DVD player (not supplied) * 5 Supplied with the auxiliary equipment * 6 Insert with the cord upwards. * 1 * 2 * 3 * 4 * 5 * 6  AMP REM Max. supply current 0.3 A Fuse (10 A) Blue/white striped Red Yellow White Green Purple White/black striped Grey/black striped Green/black striped Grey Left Right Left Right ANT REM Black Blue Max. supply current 0.1 A Purple/black striped * 1 Source selector (not supplied) XA-C40 Supplied with the CD/MD changer * 1 ATT ILLUMINATION Orange/white striped Light blue * 6 MEX-1GP Supplied with XA-C40 * AUDIO OUT SUB/REAR * 5 * 4 Notes on the control and power supply leads • The power aerial control lead (blue) supplies +12 V DC when you turn on the tuner. • When your car has built-in FM/AM aerial in the rear/side glass, connect the power aerial control lead (blue) or the accessory power input lead (red) to the power terminal of the existing aerial booster. For details, consult your dealer. • A power aerial without a relay box cannot be used with this unit. Memory hold connection When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off. Notes on speaker connection • Before connecting the speakers, turn the unit off. • Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid its damage. • Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speaker. • Do not connect the earth lead of this unit to the negative (–) terminal of the speaker. • Do not attempt to connect the speakers in parallel. • Connect only passive speakers. Connecting active speakers (with built-in amplifi ers) to the speaker terminals may damage the unit. • To avoid a malfunction, do not use the built-in speaker leads installed in your car if the unit shares a common negative (–) lead for the right and left speakers. • Do not connect the unit’s speaker leads to each other. Note on connection If speaker and amplifi er are not connected correctly, “FAILURE” appears in the display. In this case, make sure the speaker and amplifi er are connected correctly. • • • • • • • • • • •