Installation4Connection( 1A )TV ANTENNA INPUTTO MONITOR UNIT( 1A )–+(Accessory A)(Accessory D)Ignition wire (Red) ª12VACCIgnition key switchGround wire (Black) · (To car chassis)BatteryCar fuse box(Main fuse)• Make sure to ground the unit to a negative 12V DC power supply.• If your car's ignition does not come with an ACC position, connect the ignition wiresto a power source that can be turned on and off with the ignition key. If you connectthe ignition wire to a power source that receives a constant voltage supply, as withbattery wires, the battery may die.• If the fuse blows, first make sure that the wires have not caused a short circuit, thenreplace the old fuse with one with the same rating.• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on thecar are working properly.• Thoroughly wipe away oil and other dirt from the installation surface.Please avoid installation on uneven surfaces.(Black)Remove the protective sheet onthe black connector before theKTC-V500P is connected.(White)
