在线浏览, 第4页, 汉米尔顿 Hamilton KHAKI ETO 使用说明书

使用说明书页面导航

使用说明书在线浏览

6 © 24.06.2013 – HAMILTON INSTRUCTION MANUAL 7 Recommendations Like all micro-mechanical precision instruments, your Hamilton Khaki E.T.O. chronograph should be checked at least once every two years. Entrust your watch only to an authorized Hamilton agent. To keep your watch water-resistant, make sure that its sealing features are tested at every check-up. The water-resistance of your watch is 10 ATM = 100 meters = 330 feet. Your Khaki E.T.O. is equipped with a quartz movement. The electrical energy of the battery makes the quartz at the interior of the movement oscillate 32,768 times per second. This high frequency gives great accuracy. After 16 to 40 months, according to the extent to which the chronograph is used, a reduction of battery charge could result in the watch stopping. The replacement battery should be of the type Renata 394 (SR 936 SW). Five basic rules for maintaining the water-resistance of your watch 1. Have your watch checked regularly. 2. Do not move the crown when you are in water. 3. Rinse off your watch after having been in the sea. 4. Dry your watch whenever it gets wet. 5. Have your watch checked for water-resistance by an authorized Hamilton agent each time the case is opened. Calculation of speed Ex. Distance to cover: 140 miles Time available: 8 hours 1. Turn the exterior rotating bezel (1) so that the value 14 (a tenth of 140 miles) is facing 8:00 on the interior fixed bezel (2). 2. Read the speed value on the exterior rotating bezel (1) facing the red arrow = 17.5 mph. Adjustment of time zone and date With the crown (D) pulled out to its intermediate position (1), the hours hand can be adjusted forwards or backwards without affecting the settings of the minutes and seconds hands. Correction of the date occurs each time the hours hand passes 12 o’ clock midnight. NB: The crowns (D) and (E) are screwed down to guaran- tee optimal water-resistance. They have to be unscrewed to access their respective functions. Make sure that they are re-screwed down after any operations using them. Setting the time When the crown (D) is in position (2), all the watch hands – including the seconds hand – stop, and the hours and minutes hands can be adjusted as desired. Readjustment of the chronograph (If the hands are not exactly on zero.) When a chronograph hand is turning, press button (A) to stop the chronograph, then press button (B): the hands return to their starting position. If the hands should not return precisely to zero, each hand can be set to the zero position as follows: 30-minute counter With crown (D) in position 1: press button (A) 60-second counter (white hand – split-seconds hand) With crown (D) in position 2: press button (A) 60-second counter (red hand – sweep seconds hand) With crown (D) in position 2: press button (B) Remark: The hands may be advanced more rapidly by maintaining pressure on the button for more than one second. Important: Do not leave the crown in position 1 for more than 20 minutes, as this could result in interference with the timekeeping function.

页顶

非会员快捷文档下载

第一步长按二维码，打开支付宝APP或网站！

第二步提交激活码：支付宝或微信支付账单号最后6位数！

第三步自动下载或点击下列显示下载链接

页顶

微信服务公众号

页顶