手册365
手册365
品牌
类别
环境管理体系
在线浏览, 第3页, 汉米尔顿 Hamilton KHAKI ETO 使用说明书
手册365
汉米尔顿 Hamilton
汉米尔顿 Hamilton 手表
汉米尔顿 Hamilton KHAKI ETO 使用说明书
页顶
使用说明书页面导航
1
2
3
4
页顶
使用说明书在线浏览
4
© 24.06.2013 – HAMILTON
INSTRUCTION MANUAL
5
Calculation of time (E.T.O.)
Ex.
Speed: 140 mph
Distance to cover: 45 miles
1.
Turn the exterior rotating bezel (
1
) so that the value
14 (a tenth of 140 mph) is facing the red arrow.
2.
Read 45 on the same bezel (
1
).
3.
Read the time value (E.T.O.) on the interior fixed bezel
(
2
) =
19.4 minutes
. For memorization, indicate the
E.T.O. value in the window (
3
) by using the crown (
E
).
Calculation of distance to cover
Ex.
Speed : 140 mph
Time available: 15 minutes
1.
Turn the exterior rotating bezel (
1
) so that the value
14 (a tenth of 140 mph) is facing the red arrow.
2.
Read 15 on the interior fixed bezel (
2
).
3.
Read the value of the distance to be covered on the
exterior rotating bezel (
1
) =
35 miles
.
Calculation functions
The bezels of the E.T.O. allow you to calculate three values:
time
,
distance
and
speed
, for any units of measurement.
Split-seconds function
(intermediate times)
This function allows the display and reading of multiple
successive times measured from the same starting point.
The time taken to read the amounts can be caught up
on without disturbing the measurement of total elapsed
time.
1.
Press button (
A
): the chronograph starts.
2.
Press button (
C
) to read the first intermediate time.
3.
Press button (
C
) again. The chronograph hands catch
up with the time elapsed since the beginning of the
measurement.
4.
Similarly, press button (
C
) again to read a further inter-
mediate time, and once again to cause the hands to
catch up.
5.
At the end of the whole measurement, press button
(
A
) to read the total time.
6.
Press button (
B
) to reset to zero.
NB:
The maximum catch-up time is 30 minutes.
Memorization of the last
intermediate time
1.
Press button (
A
): the chronograph starts.
2.
Press button (
C
) to read the first intermediate time.
3.
Press button (
C
) again. The chronograph hands catch
up with the time elapsed since the beginning of the
measurement.
4.
Press button (
C
) to read the second intermediate time.
5.
Press button (
A
) to read the final total time.
6.
Press button (
C
) to read the memorized last interme-
diate time.
7.
Press button (
C
) to return to the final time display.
8.
Press button (
B
) to reset to zero.
Flyback function
The flyback function (also known as retour-en-vol or
instant restart) allows resetting of the counter hands to
zero by pressing button (
B
) without first stopping the
timing. When the button is released, the large sweep sec-
onds-hand starts a new time measurement. This function
allows the user to gain some seconds in the manipulation
of the chronograph, which facilitates directional calcula-
tions for pilots, for instance.
1.
Press button (
A
): the chronograph starts.
2.
Press button (
B
): the chronograph returns to zero and
restarts.
页顶
上一页
1
2
3
4
下一页
页顶
非会员快捷文档下载
第一步
长按二维码，打开支付宝APP或网站！
第二步
提交激活码：支付宝或微信支付账单号最后6位数！
激活码:
第三步
自动下载或点击下列显示下载链接
页顶
微信服务公众号
页顶
页顶
