8 | EN GLISHEN G LISH |9The full moon is completely visible. Use a calendar to determine the date of the last full moon.Press corrector A for the number of days since the last full moon.Set the current day of the week by pushing corrector B.1134512322SET THE MOON PHASE / LEAP YEAR AND MONTHSET DATE / DAY OF THE WEEKPress corrector A repeat-edly until the “full moon” position is shown in the moon phase.Set the current date by pushing corrector C.Set the date: Press corrector C repeatedly until the date indicator shows 1.Press corrector D repeatedly until the current year is shown (IIII = leap year, I = 1 year after leap year, etc.).Continue to press corrector D repeatedly until the current month is shown.Pull the crown until it is in position 1. The small seconds hand does not move.Intentionally set the cur-rent time at a.m. or p.m. by rotating the crown.Push the crown back to the initial position. The small seconds hand is back in motion.leap year. On 1 March 2100, a simple manual date correction has to be done as a result.In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time.NOTE FOR 2100Because of this very complicated mechanism, the watch will handle all of the date switches without a problem until the year 2100. This is because February 2100 has only 28 days, rather than the 29 that would be usual in a WARNINGThe correctors must not be used between 8:00 p.m. and 2:00 a.m. because doing so can damage the movement.SET TIME
