4 |Quick Start GuidePreparations Exit Demonstration ModeTurn off the demonstration mode when you use it for the first time after installation. Press the Control knob to quit the demonstration mode when the messages “To Cancel DEMO Press the volume knob” are displayed (approx. 15 seconds). Turn the Control knob and press it when the “YES” is displayed.The demonstration mode can also be canceled in the Function setting mode. Refer to (page 22) of Instruction manualAdjusting the Clock Press the [DISP] button several times to display the clock. Press the [DISP] button for at least 1 second. Turn the Control knob to adjust the hour, and then press the Control knob. Turn the Control knob to adjust the minute, and then press the Control knob.Control knob (Volume knob)Release[DISP]Detaching/ Reattaching the FaceplatePress the Release button.¤• Remove the faceplate at once after pressing the Release button; otherwise it can fall down due to vibration.• The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached.• Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.IM327_QSG_M_en_00.indd 4IM327_QSG_M_en_00.indd 410/12/03 14:4410/12/03 14:44
