English | 3Notes• If you experience problems during installation, consult your Kenwood dealer.• When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.• Characters that conform to ISO 8859-1 can be displayed.• To display characters in the following language, additional setting is required. KDC-U7049BT KDC-U7049BTL - ChineseRefer to “Chinese” of (page 22) (Instruction Manual).• KDC-U6049 KDC-U6049L - Arabic- Persian- ThaiRefer to “Language” of (page 22) (Instruction Manual).• The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.About discs used with this unit• This unit can only play the CDs with .• The following discs cannot be used:- Discs that are not round- Discs with coloring on the recording surface or discs that are dirty- Recordable/Rewritable disc that has not been finalized (For the finalization process, refer to your disc writing software, and your disc recorder instruction manual.)- 8 cm (3 inch) disc (Attempt to insert using an adapter can cause malfunction.)Handling discs• Do not touch the recording surface of the disc.• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.• Do not use any accessories for the disc.• Do not use any solvents to clean discs. Use a dry silicon or soft cloth.• Clean from the center of the disc and move outward.• When removing discs from this unit, pull them out horizontally.• Remove the rims from the center hole and disc edge before inserting a disc.How to reset your unitIf the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset buttonIM327_QSG_M_en_00.indd 3IM327_QSG_M_en_00.indd 310/12/03 14:4410/12/03 14:44
