在线浏览, 第1页, 索尼 Sony CMT-G1IP 使用说明书

4-283-813-94(1) Micro HI-FI Component System 迷你音响组合 GB Operating Instructions CS 使用说明书 ©2011 Sony Corporation Printed in China CMT‑G1iP WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with battery- installed to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. CAUTION The use of optical instruments with this product will increase eye hazard. This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Excessive sound pressure from earphones and headphones can cause hearing loss. Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. License and Trademark Notice iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified.      Getting Started Location of Controls Unit (Front) (Rear)   (power) button  STANDBY indicator  Disc tray  Display   (open) button  Playback buttons (/)  TUNING +/ buttons / (go back/go forward) buttons / (rewind/fast forward) buttons  (USB) port  PHONES jack  BASS/TREBLE knobs  FUNCTION knob  VOLUME knob  Remote sensor  AUDIO IN 1/2 jacks  SPEAKERS terminals  AC IN jack  ANTENNA FM 75 Ω COAXIAL terminal  ANTENNA AM terminal Remote   (power) button  / (go back/go forward) buttons +/ (tuning) buttons  / (rewind/fast forward) buttons  +/ (select folder) buttons  Playback buttons (//)  FUNCTION +/ buttons  VOLUME +/ buttons  EQ button  TIMER MENU button  TOOL MENU button  /// buttons  RETURN button  ENTER button  CLEAR button  TUNER MEMORY button  REPEAT/FM MODE button  PLAY MODE/TUNING MODE button  SLEEP button  DISPLAY button  Αntennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the AC power cord to avoid picking up noise.  Power Connect the AC power cord to a wall outlet. When you press , the system turns on.  Speakers First, remove the cover attached to the end of the speaker cord. Connect the speaker cords to the SPEAKERS terminals on the unit. Connect the other end of the speaker cords to the terminals on the speakers as shown below. Fasten the speaker cord using the screws of the SPEAKERS terminals firmly. Black Notes on cleaning the speakers Wipe it with soft dry cloth (non-starched). (Do not ever use a scrubbing brush or sponge.) To maintain the continued polish of the cabinet, do not wipe it vigorously right from the start, but first brush away dust with a soft brush or a duster before you wipe it with soft dry cloth. If it is stained with oil or fingerprints, breath on the surface and wipe it with soft dry cloth. If the stain is tough to remove, wipe it with soft cloth washed in lukewarm soapy water. (Do not use a neutral detergent.) Do not use thinner, benzene, alcohol, or hair liquid, which may damage the surface. Be careful not to scrape the cabinet. Be careful not to drop a lit cigarette or match, as it may damage the surface. To attach the speaker pads Attach the speaker pads (supplied) to the bottom of the speakers to prevent from slipping. To use the iPod/iPhone Connect the iPod/iPhone to the (USB) port using a USB cable supplied with your iPod/iPhone.        or Black Operations Playing a CD/MP3 disc 1 Select the CD function. Press FUNCTION +/ repeatedly. 2 Place a disc. Press  on the unit, and place a disc with the label side up on the disc tray. To close the disc tray, press  on the unit. 3 Start playback. Press . Other operations To Press Pause playback . To resume play, press the button again. Stop playback . Select a folder on an MP3 disc +/ repeatedly. Select a track or file  /. Find a point in a track or file Hold down / during playback, and release the button at the desired point. Select Repeat Play REPEAT/FM MODE repeatedly until “REP” or “REP1” appears. To change the play mode Press PLAY MODE/TUNING MODE repeatedly while the player is stopped. You can select the Normal Play mode (“ ” for all MP3 files in the folder on the disc), Shuffle Play mode (“SHUF” or “  SHUF*” for folder shuffle), or Program Play mode (“PGM”). * When playing a CD-DA (audio) disc, (SHUF) Play performs the same operation as normal (SHUF) Play. Note on Repeat Play “REP1” indicates that a single track or file is repeated until you stop playback. Notes on the Shuffle Play mode When the Shuffle Play mode is set to “SHUF,” the system shuffle- plays all tracks or files on the disc. When the Shuffle Play mode is set to “ SHUF,” the system shuffle-plays all tracks or files in the selected folder. When you turn off the system, the selected Shuffle Play mode (“SHUF” or “ SHUF”) is cleared and the play mode returns to the Normal Play mode (“ ”). Notes on playing MP3 discs Do not save other types of tracks or files, or unnecessary folders on a disc that has MP3 files. Folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of “.mp3.” Even when file name has the “.mp3” file extension, if the actual file differs, playing this file may generate a loud noise which could damage the speaker system and the system may malfunction. The maximum number of: folders is 255 (including the root folder). MP3 files is 511. MP3 files and folders that can be contained on a single disc is 512. folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted sound or may not play at all. Notes on playing multisession discs If the first session on the disc is a CD-DA session, the other sessions on the disc cannot be recognized regardless of the session format; only CD-DA tracks in the first session can be played back. If the session format for the first session is CD-ROM and the following sessions are recorded in the same format, the system will continue to play back MP3 files accordingly in multiple sessions until the system encounters another session recorded in a different format. Creating your own program (Program Play) 1 Select the CD function. Press FUNCTION +/ repeatedly. 2 Select the play mode. Press PLAY MODE repeatedly until “PGM” appears while the player is stopped. 3 Select the desired track or file number. Press / repeatedly until the desired track or file number appears. When programming audio files, press +/ repeatedly to select the desired folder, and then select the desired file. Selected track or file number Total playing time of the selected track or file 4 Program the selected track or file. Press ENTER to enter the selected track or file. 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press . The program remains available until you remove the disc from the disc tray or unplug the AC power cord. To play the same program again, press .                To cancel Program Play Press PLAY MODE/TUNING MODE repeatedly until “PGM” disappears while the player is stopped. To delete the last track or file of the program Press CLEAR while the player is stopped. To view program information Press DISPLAY repeatedly while the player is stopped. Listening to the radio 1 Select “TUNER FM” or “TUNER AM.” Press FUNCTION +/ repeatedly. 2 Perform tuning. For automatic scanning Press PLAY MODE/TUNING MODE repeatedly until “AUTO” appears, and then press +/. Scanning stops automatically when a station is tuned in, and “TUNED” and “STEREO” (for stereo programs only) light up in the display. If “TUNED” does not light up and the scanning for an FM or AM station does not stop, press  to stop scanning, then perform manual tuning (below). For manual tuning Press PLAY MODE/TUNING MODE repeatedly until “AUTO” and “PRESET” disappear, and then press +/ repeatedly to tune in the desired station. Tip To reduce static noise on a weak FM stereo station, press FM MODE repeatedly until “MONO” appears to turn off stereo reception. Presetting radio stations 1 Tune in the desired station. 2 Press TUNER MEMORY to select the tuner memory mode. 3 Press +/ repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new station. 4 Press ENTER to store the station. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. 6 To call up a preset radio station, press PLAY MODE/ TUNING MODE repeatedly until “PRESET” appears, and then press +/ repeatedly to select the desired preset number. Playing the iPod/iPhone 1 Select the USB function. Press FUNCTION +/ repeatedly. 2 Connect the iPod/iPhone to the (USB) port using the USB cable supplied with your iPod/iPhone. 3 Start playback. Press . To control the iPod/iPhone To Press Pause playback /. Select a track or chapter of audiobook/podcast  /. To fast-forward or fast- rewind, hold down the button. Find a point in a track or chapter of audiobook/podcast Hold down / during playback, and release the button at the desired point. Choose the selected item ENTER. Scroll up/down the iPod menus /. Return to the previous menu or select a menu TOOL MENU or RETURN. To use the system as a battery charger You can use the system as a battery charger for an iPod/ iPhone when the system is on. Connect the iPod/iPhone to the (USB) port using the USB cable supplied with your iPod/iPhone. The charge status appears in the iPod/iPhone display. For details, see the user’s guide of your iPod/iPhone. To stop charging an iPod/iPhone Remove the iPod/iPhone. Turning off the system also stops charging the iPod/iPhone.  To wall outlet  Loop antenna  FM lead antenna (Extend it horizontally.)  Connect brown side.  To left speaker  To right speaker When carrying this system Use buttons on the unit. 1 Remove a disc to protect the CD mechanism. 2 Select CD function using the FUNCTION knob. 3 Press and hold  for 5 seconds or longer. 4 After “LOCK” appears, unplug the AC power cord. To use the remote This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. Inserting batteries Slide and remove the battery compartment lid, and insert two R03 (size AAA) batteries (supplied),  side first, matching the polarities shown below. Notes on using the remote With normal use, the batteries should last for about 6 months. Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. Batteries installed into the remote shall not be exposed to excessive heat such as sunshine, fire or the like. To set the clock 1 Press  to turn on the system. 2 Press TIMER MENU to select the clock set mode. If “PLAY SET?” flashes, press / repeatedly to select “CLOCK SET?,” and then press ENTER. 3 Press / repeatedly to set the hour, then press ENTER. 4 Use the same procedure to set the minutes. Note The clock settings are reset when you disconnect the AC power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY. The clock is displayed for about 8 seconds.     Notes If the battery of the iPod/iPhone is empty, the system may not recognize it. In such a case, recharge it with a computer, etc. then connect it to the system. The performance of the system may be vary, depending on the specifications of your iPod/iPhone. Do not carry the system with an iPod/iPhone connected to it. Doing so may cause a malfunction. Before disconnecting the iPod/iPhone, pause playback. Hold down / to fast-forward (fast-rewind) while playing video if / does not work. When the iPhone is connected to the system and you receive a call during playback, playback will pause and you can take an incoming call. To change the volume level, use VOLUME +/. The volume level does not change even if you adjust it on the iPod/iPhone. To use an iPod/iPhone, refer to the user’s guide of your iPod/iPhone. Sony cannot accept responsibility in the event that data recorded to iPod/iPhone is lost or damaged when using an iPod/iPhone with this system. Playing a file of the USB device The audio format that can be played back on this system is MP3/WMA*/AAC*. * Files with DRM (Digital Rights Management) copyright protection or files downloaded from an online music store cannot be played on this system. If you try to play one of these files, the system plays the next unprotected audio file. Check the websites below for the information about compatible USB devices. 1 Select the USB function. Press FUNCTION +/ repeatedly. 2 Connect the USB device to the (USB) port. 3 Start playback. Press . Other operations To Press Pause playback . To resume play, press the button again. Stop playback . To resume play, press * 1 . To cancel resume play, press  again* 2 . Select a folder +/ repeatedly. Select a file /. Find a point in a file Hold down / during playback, and release the button at the desired point. Select Repeat Play REPEAT/FM MODE repeatedly until “REP” or “REP1” appears. * 1 When playing a VBR MP3/WMA file, the system may resume playback from a different point. * 2 Resume play returns to the top folder. To change the play mode Press PLAY MODE/TUNING MODE repeatedly. You can select the Normal Play mode (playback in sequence of all files on the USB device), Folder Play mode (“ ” for all files in the specified folder on the USB device), or Shuffle Play mode (“SHUF”). Notes on the play mode When you select the Shuffle Play mode “SHUF,” the system shuffle- plays all audio files in the connected USB device in random order. The Shuffle Play mode may play the same file repeatedly. When the play mode is set to the Folder Play mode, “REP1” is not available. When the play mode is set to the Shuffle Play mode, the repeat function is not available. When the repeat play is set, the Shuffle Play mode is not available. When the repeat play is set to “REP1,” the Folder Play mode is not available. When you turn off the system, the selected Shuffle Play mode (“SHUF”) is cleared and the play mode returns to the Normal Play mode. Note on Repeat play If you select “REP” in the Normal Play mode, the system repeats playback of all audio files stored in the USB device. If you select “REP” in the Folder Play mode, the system repeats playback of all audio files in the selected folder. Notes When the USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. See the operation manual supplied with the USB device to be connected for details on the operation method. It may take about 10 seconds before “Reading” appears depending on the type of USB device connected. Do not connect the system and the USB device through a USB hub. When the USB device is inserted, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. Compatibility with all encoding/writing software cannot be guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted sound, or may not be played back at all. This system cannot play audio files on the USB device in the following cases; when the total number of audio files in a folder exceeds 100. when the total number of audio files on a USB device exceeds 10000. when the total number of folders on a USB device exceeds 100 (including the “ROOT” folder and empty folders). These numbers may vary depending on the file and folder structure. Do not save other types of files or unnecessary folders on the USB device that has audio files. This system displays the track number as “---” when the number of audio files on a USB device exceeds 1000. The system can play back to a depth of 8 folders only. This system does not necessarily support all the functions provided in a connected USB device. Folders that have no audio files are skipped. The audio formats that you can listen to with this system are as follows: MP3: file extension “.mp3” WMA: file extension “.wma” AAC: file extension “.m4a” Note that even when file name has the correct file extension, if the actual file differs, the system may produce noise or may malfunction.                                 使用产品前请仔细阅读本使用说明书，并请妥善保管 Micro HI-FI Component System 迷你音响组合 CS 使用说明书 ©2011 Sony Corporation Printed in China CMT‑G1iP 注意 关于电池的使用 应确保儿童不可触及电池；如误吞下，请速 联系医院。 为了减少火灾危险，请勿用报纸、桌布、窗 帘等覆盖本装置的通风口。请勿将明火源 （如点燃的蜡烛）放在本装置上。 为了减少火灾或触电的危险，请勿将本装置 暴露于滴水或溅水中，并不要把装有液体的 物品（如花瓶）放在本装置上。 请勿将本机安放在书橱或壁橱等狭窄封闭处。 由于电源插头用于断开主机与电源的连接， 请将主机连接到容易插拔的交流电源插座上。 如果发现主机发生异常，请立即将电源插头 从交流电源插座上拔下。 请勿将电池或装有电池的装置暴露在阳光、 火焰或类似的过热热源附近。 即使关闭本机自身的电源，只要其电源线仍 插在交流电源插座上，便未脱离电源。 警告 与光学仪器一起使用本产品将会增加眼睛受 伤的危险。 本装置属于1类激光 （CLASS 1 LASER）产 品。本标签位于背面 外壳上。 耳机音量过大会导致听力下降。 制造商：索尼公司 原产地：中国 总经销商：索尼（中国）有限公司 地址：北京市朝阳区东三环北路 霞光里18号佳程大厦A座25层 出版日期：2011年6月 有关DualDisc的注意事项 DualDisc是一种双面光盘产品，一面含有符 合录制DVD的素材，另一面为数字音频素材。 但是，由于音频素材一面不符合Compact Disc（CD）标准，因此，无法保证在本产品 上播放。 使用版权保护技术编码的音乐光盘 本产品设计用于播放符合Compact Disc（CD） 标准的光盘。近来，一些唱片公司在出售各 种用版权保护技术编码的音乐光盘。请注意， 有些光盘不符合CD标准，可能无法用本产品 播放。 许可和商标须知 iPhone、iPod、iPod classic、iPod nano 和iPod touch为Apple Inc.在美国及其他国 家注册的商标。 MPEG Layer-3音频编码技术和专利由 Fraunhofer IIS和Thomson授权。 Windows Media是Microsoft Corporation在 美国和/或其他国家的注册商标或商标。 本产品受Microsoft Corporation的某些知 识产权的保护。未经Microsoft或Microsoft 的授权分支机构的许可，禁止超出本产品的 范围使用或发行这类技术。 所有其他商标和注册商标是其相应持有者的 商标或注册商标。在本手册中，并未标明 ™ 和 ® 标记。      使用产品前请仔细阅读本使用说明书，并请妥善保管 使用前的准备工作 控制器的位置 主机（正面） （后部）  （电源）按钮  STANDBY指示灯  光盘托盘  显示窗  （打开）按钮  播放按钮（ /）  TUNING +/ 按钮 /（后退/前进）按钮 /（快退/快进）按钮  （USB）端口  PHONES插孔  BASS/TREBLE旋钮  FUNCTION旋钮  VOLUME旋钮  遥控传感器  AUDIO IN 1/2插孔  SPEAKERS端子  交流输入插孔  ANTENNA FM 75 Ω COAXIAL端子  ANTENNA AM端子 遥控器  （电源）按钮  /（后退/前进）按钮 +/ （调谐）按钮  /（快退/快进）按钮  +/ （选择文件夹）按钮  播放按钮（ //）  FUNCTION +/ 按钮  VOLUME +/ 按钮  EQ按钮  TIMER MENU按钮  TOOL MENU按钮  ///按钮  RETURN按钮  ENTER按钮  CLEAR按钮  TUNER MEMORY按钮  REPEAT/FM MODE按钮  PLAY MODE/TUNING MODE按钮  SLEEP按钮  DISPLAY按钮 天线 找到一个接收状态良好的位置和方向，然后 设置天线。 将天线远离扬声器导线和交流电源线，以避 免受到噪音干扰。 电源 将交流电源线连接到电源插座上。 按 后，系统开启。 扬声器 首先，取下扬声器导线末端的保护盖。 将扬声器导线连接到主机的SPEAKERS端子上。 如下图所示，将扬声器导线的另一端连接至 扬声器上的端子。 用SPEAKERS端子的螺钉将扬声器导线牢牢固 定住。 黑色 扬声器清洁注意事项 用柔软的干布（非浆硬的）擦拭扬声器。 （请勿 使用硬毛刷或海绵。 ） 为保持机箱的长久光泽，从一开始就不要用力 擦拭，但可用软刷或抹布先去除灰尘，然后再 用柔软的干布进行擦拭。 如果沾有油渍或指纹，可用柔软的干布轻拂表 面，然后进行擦拭。 如果污渍很难去除，可用温和的肥皂水浸泡过 的软布进行擦拭。 （请勿使用中性洗涤剂。 ） 请勿使用稀释剂、苯、酒精或洗发液，否则可 能损坏机器表面。 小心请勿刮擦机箱。 小心请勿掉落燃烧的香烟或火柴，否则会损坏 机器表面。 安装扬声器垫片 在扬声器底面安装扬声器垫片（附件）以防 止扬声器滑动。 使用iPod/iPhone 使用iPod/iPhone附带的USB电缆，将iPod/ iPhone连接到 （USB）端口。        或 黑色 操作 播放CD/MP3光盘 1 选择CD功能。 反复按FUNCTION +/ 。 2 放入光盘。 按主机上的 ，将光盘放入 光盘托盘（标签面朝上） 。 若要关闭光盘托盘，按主机上的 。 3 开始播放。 按 。 其他操作 若要 请按 暂停播放 。若要恢复播放，可再次 按该按钮。 停止播放 。 选择MP3光盘上 的文件夹 反复按 +/ 。 选择曲目或 文件 /。 寻找曲目或 文件中的某个 位置 在播放过程中按住 /， 然后在所需的位置释放该按 钮。 选择反复播放 反复按REPEAT/FM MODE，直 到出现“REP”或“REP1” 。 更改播放模式 当播放机停止播放时，反复按PLAY MODE/ TUNING MODE。可以选择正常播放模式（ “ ” 用于播放光盘文件夹中所有的MP3文件） 、任 选播放模式（ “SHUF”或“ SHUF *”用于文 件夹任选播放）或编程播放模式（ “PGM” ） 。 * 当播放CD-DA（音频）光盘时， （SHUF）播 放执行与正常（SHUF）播放相同的操作。 反复播放注意事项 “REP1”表示反复播放单一曲目或文件，直到停 止播放为止。 任选播放模式注意事项 当任选播放模式设为“SHUF”时，系统任选播 放光盘上的所有曲目或文件。当任选播放模式 设为“ SHUF”时，系统任选所选文件夹中 的所有曲目或文件。 当关闭系统电源时，所选的任选播放模式 （ “SHUF”或“ SHUF” ）被清除，播放模式返 回到正常播放模式（ “ ” ） 播放MP3光盘注意事项 请勿在含有MP3文件的光盘上保存其他类型的 曲目、文件或多余的文件夹。 不含MP3文件的文件夹将被略过。 MP3文件以其在光盘上录制的顺序播放。 本系统仅可播放具有“.mp3”文件扩展名的MP3 文件。 即使文件名具有“.mp3”文件扩展名，如果实 际文件不同，播放该文件可能会产生损坏扬声 器系统的强大噪音并且系统可能会发生故障。 最大数目： 255个文件夹（包括根文件夹在内） 。 511个MP3文件。 单张光盘可包含的MP3文件和文件夹的总数为 512。 8个文件夹级别（文件的树状结构） 。 不保证与所有MP3编码/写入软件、录制设备以 及录制媒体兼容。不兼容的MP3光盘可能会发出 噪音、出现声音中断或可能根本无法播放。 播放多区段光盘的注意事项 如果光盘上的第一区段是CD-DA区段，不管区 段格式如何，光盘上的其他区段都不会被识别， 只会播放第一区段中的CD-DA曲目。 如果第一区段的区段格式为CD-ROM并且接下来 的区段也以相同格式记录，系统将依次连续播 放多区段中的MP3文件，直到系统遇到以不同格 式记录的其他区段为止。 创建自己的程序（编程播放） 1 选择CD功能。 反复按FUNCTION +/ 。 2 选择播放模式。 在播放机停止播放时，反复按PLAY MODE直 到出现“PGM” 。 3 选择所需的曲目或文件编号。 反复按 /，直到出现所需的曲目或 文件编号。 当编制音频文件时，反复按 +/ 选择所 需的文件夹，然后选择所需的文件。 所选曲目或文件编号 所选曲目或文件的 总播放时间 4 编制所选的曲目或文件。 按ENTER输入所选曲目或文件。 5 重复步骤3至4，编制其他曲目或文件，最 多可达25个曲目或文件。                6 若要播放编程的曲目或文件，按 。 从光盘托盘中取出光盘或断开交流电源线 之前，程序保持不变。 若要再次播放相同的程序，按 。 取消编程播放 在播放机停止播放时，反复按PLAY MODE/ TUNING MODE，直到“PGM”消失。 删除编程的最后一个曲目或文件 在播放机停止播放时，按CLEAR。 浏览程序信息 在播放机停止播放时，反复按DISPLAY。 收听广播 1 选择“TUNER FM”或“TUNER AM” 。 反复按FUNCTION +/ 。 2 进行调谐。 对于自动扫描 反复按PLAY MODE/TUNING MODE，直到出现 “AUTO” ，然后按+/ 。当调到电台时，扫描 自动停止，显示窗中“TUNED”和“STEREO” （仅限于立体声节目）点亮。 如果“TUNED”没有点亮，且FM或AM电台扫 描没有停止，可按 停止扫描，然后执行 手动调谐（下述） 。 对于手动调谐 反复按PLAY MODE/TUNING MODE， 直到 “AUTO” 和“PRESET”消失，然后反复按+/ 调至所 需的电台。 提示 若要减少信号微弱的FM立体声电台的静电噪音， 可反复按FM MODE，直到出现“MONO”并关闭立 体声接收功能。 预设广播电台 1 调至所需的电台。 2 按TUNER MEMORY选择调谐器存储模式。 3 反复按+/ 选择所需的预设编号。 如果所选预设编号已被其他电台使用，已 存在的电台会被新电台替换。 4 按ENTER存储电台。 5 重复步骤1至4存储其他电台。 最多可以预设20个FM和10个AM电台。 6 若要调出预设电台，可反复按PLAY MODE/ TUNING MODE，直到出现“PRESET” ，然后 反复按+/ 选择所需的预设编号。 播放iPod/iPhone 1 选择USB功能。 反复按FUNCTION +/ 。 2 使用iPod/iPhone附带的USB电缆，将iPod/ iPhone连接到 （USB）端口。 3 开始播放。 按 。 控制iPod/iPhone 若要 请按 暂停播放 /。 选择有声读物/ 播客的曲目或 章节 /。若要快进或快退， 按住该按钮。 搜索有声读物/ 播客的曲目或 章节中的位置 在播放过程中按住 /， 然后在所需的位置释放该按 钮。 选择所选项目 ENTER。 向上/下滚动 iPod菜单 /。 返回上一个菜 单或选择菜单 TOOL MENU或RETURN。 将本系统作为电池充电器使用 当系统电源打开时，可将本系统用作iPod/ iPhone的电池充电器。 使用iPod/iPhone附带的USB电缆，将iPod/ iPhone连接到 （USB）端口。充电状态显 示在iPod/iPhone的显示窗中。详情请参阅 iPod/iPhone的用户指南。 停止给iPod/iPhone充电 取下iPod/iPhone。关闭系统电源也会停止给 iPod/iPhone充电。  至电源插座  环形天线  FM导线天线（将其水平延伸。 ）  连接褐色端。  至左扬声器  至右扬声器 搬运本系统时 使用主机上的按钮。 1 取出光盘以保护CD机械装置。 2 用FUNCTION旋钮选择CD功能。 3 按住 5秒钟以上。 4 出现“LOCK”后，拔下交流电源线。 使用遥控器 本手册主要说明使用遥控器的操作，但使用 主机上具有相同或相似名称的按钮也可以进 行相同的操作。 插入电池 滑动并取下电池舱盖，然后插入两节R03（AAA 尺寸）电池（附件） ，先插入 侧，使极性与 下图所示一致。 使用遥控器时的注意事项 正常使用情况下，电池可以使用约6个月。 请勿将新旧电池或不同类型的电池混合使用。 如果长时间不使用遥控器，请将电池取出，以 避免电池漏液和腐蚀可能造成的损害。 不得将遥控器中安装的电池暴露于阳光、火焰 等过热的环境中。 设定时钟 1 按 打开系统电源。 2 按TIMER MENU选择时钟设定模式。 如果“PLAY SET?”闪烁，反复按 /选择 “CLOCK SET?” ，然后按ENTER。 3 反复按 /设定小时，然后按ENTER。 4 按照相同的步骤设定分钟。 注意 断开交流电源线或停电时，时钟设置复位。 在系统关闭时显示时钟 按DISPLAY。时钟显示约8秒钟。     注意 如果iPod/iPhone的电池没电，系统可能无法 进行识别。此时，应使用计算机等给电池充电， 然后再将其连接到系统上。 系统的性能可能不尽相同，视iPod/iPhone的规 格而定。 请勿在iPod/iPhone与系统连接的情况下搬运 系统。否则可能导致故障。 断开iPod/iPhone的连接之前，请暂停播放。 如果 /不起作用，可在播放视频时按住 /快进（快退）。 当iPhone与本系统连接并在播放期间接到电话 时，播放会暂停，您可以接听电话。 若要改变音量电平，可使用VOLUME +/ 。即使 在iPod/iPhone上进行调节，音量电平也不会改 变。 若要使用iPod/iPhone，请参阅iPod/iPhone的 用户指南。 在本系统上使用iPod/iPhone时，如果记录在 iPod/iPhone上的数据丢失或受损，Sony不予承 担任何责任。 播放USB设备的文件 可在本系统上播放的音频格式为MP3/WMA */ AAC *。 * 不能在本系统上播放带有DRM（数字版权管理） 版权保护的文件或从网上音乐店中下载的文 件。如果尝试播放其中的某个文件，系统将会 播放下一个未受保护的音频文件。 有关USB兼容设备的信息，请查看以下网站的 内容。 1 选择USB功能。 反复按FUNCTION +/ 。 2 将USB设备连接到 （USB）端口。 3 开始播放。 按 。 其他操作 若要 请按 暂停播放 。若要恢复播放，可再次 按该按钮。 停止播放 。若要恢复播放，按 * 1 。 若要取消恢复播放，可再次 按  * 2 。 选择文件夹 反复按 +/ 。 选择文件 /。 找到文件的播 放位置 在播放过程中按住 /， 然后在所需的位置释放该按 钮。 选择反复播放 反复按REPEAT/FM MODE，直 到出现“REP”或“REP1” 。 * 1 播放VBR MP3/WMA文件时，系统可能会从不同 的位置恢复播放。 * 2 恢复播放返回至顶部文件夹。 更改播放模式 反复按PLAY MODE/TUNING MODE。您可以选 择正常播放模式（依次播放USB设备上所有 文件） 、文件夹播放模式（USB设备上指定文 件夹中的所有文件“ ” ）或任选播放模式 （ “SHUF” ） 。 播放模式注意事项 选择任选播放模式“SHUF”时，系统将随机任 选播放所连接USB设备上的所有音频文件。任选 播放模式可能会重复播放相同的文件。 当播放模式设为文件夹播放模式时， “REP1”不 可用。 当播放模式设为任选播放模式时，重复功能不 可用。 当设为反复播放时，任选播放模式不可用。当 反复播放设为“REP1”时，文件夹播放模式不 可用。 当关闭系统的电源时，所选的任选播放模式 （ “SHUF” ）被清除，播放模式返回到正常播放模 式。 反复播放注意事项 如果在正常播放模式中选择“REP” ，系统将反 复播放USB设备中存储的所有音频文件。 如果在文件夹播放模式中选择“REP” ，系统将 反复播放所选文件夹中的所有音频文件。 注意 需要USB电缆连接时，请用附带的USB电缆连接 要连接的USB设备。有关使用方法的详情，请参 阅要连接的USB设备附带的操作手册。 在出现“Reading”之前可能需要约10秒钟，视 所连接USB设备的类型而定。 请勿经由USB集线器连接本系统和USB设备。 当插入USB设备时，系统读取USB设备上的所有 文件。如果USB设备上有许多文件夹或文件，到 完成USB设备读取为止可能需要较长时间。 对于某些连接的USB设备，执行某一操作后到本 系统执行该操作为止，可能会有一些迟延。 不保证与所有编码/写入软件兼容。如果USB设 备上的音频文件原先采用不兼容的软件编码， 这些文件可能会产生噪音、声音中断或完全无 法播放等现象。 在下列情况下，本系统无法播放USB设备上的音 频文件： 当文件夹中的音频文件总数超过100时。 当USB设备上的音频文件总数超过10000时。 当USB设备上的文件夹总数超过100（包括 “ROOT”文件夹和空文件夹）时。 这些数目可能有所不同，视文件和文件夹构造 而定。请勿在含有音频文件的USB设备上保存其 他类型的文件或不必要的文件夹。                         产品中有毒有害物质或元素的名称及含量 （ ：不含有，：含有） 部件名称 有毒有害物质或元素 铅 （Pb） 汞 （Hg） 镉 （Cd） 六价铬 （Cr（VI） ） 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 内置线路板       外壳       光学块       驱动单元       扬声器       附件       ： 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/ T11363-2006标准规定的限量要求以下。 ： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006标准规定的限量要求。