SPECIAL NOTE FOR USERS IN THE U.K.The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Shouldthe fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating asabove, which is also indicated on the pin face of the plug, must be used.Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off themains plug and fit an appropriate type.DANGER:The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed ofin a safe manner.Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a seriouselectric shock may occur.To fit an appropriate plug to the mains lead, follow the instructions below:WARNING:THIS APPARATUS MUST BE EARTHED.IMPORTANT:The wires in this mains lead are coloured in accordance with the following code:Green-and-yellow : EarthBlue: NeutralBrown: LiveAs the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markingsidentifying the terminals in your plug proceed as follows:∑The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked bythe letter E or by the safety earth symbol or coloured green or green-and-yellow.∑The wire which is coloured blue must be connected to the terminal which is marked with the letter N or colouredblack.∑The wire which is coloured brown must be connected to the terminal which is marked with the letter L or colouredred.IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.iii
