在线浏览, 第4页, 建伍 Kenwood KAC-X10D 使用说明书

4 English Connection 40 2WARNING To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery’s positive terminal. 2CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. • Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits. • Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. * Commercially available parts Lead terminal* Ground wire* Power control wire Subwoofer (L + R) Battery wire* Protective Fuse* Terminal cover CENTER UNIT (CD receiver, etc.) RCA cable* Left input Right input Battery 40 Remote cable (6.0 m) Remote controller ■ Remote cable connection 2CAUTION • Before connecting the remote controller cables, always turn the Bass boost level knob all the way to the left. B64-3518-00_M_English.indd 4 B64-3518-00_M_English.indd 4 06.10.16 10:39:30 AM 06.10.16 10:39:30 AM