在线浏览, 第4页, 建伍 Kenwood KAC-7203 使用说明书

4 English 3040 3040 Connection CENTER UNIT (CD receiver, etc.) RCA cable* Lead terminal* Left speaker Right speaker ■ Bridged Connections Speaker (Bridged) Battery Ground wire* Battery wire* Protective Fuse* Power control wire Left input Right input 2WARNING To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery’s positive terminal. 2CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. • Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits. • Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. NOTE • Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage. * Commercially available parts Terminal cover 3040 ■ RCA cable or Speaker level input connection ■ Power wire and Speaker wire connection Genuine-accessory car stereo (No line output center unit etc.) ACC Battery Car fuse box • RCA cable connections • Speaker level input connections Cable Color of the connector Left 9 White · White/Black Right 9 Gray · Gray/Black Power control wire B64-3503-00_00_KAC-7203_M.indb 4 B64-3503-00_00_KAC-7203_M.indb 4 06.10.16 10:42:53 AM 06.10.16 10:42:53 AM