4|EnglishConnectionIf you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.Antenna CordFM/AM antenna inputConnect to the vehicle's parking brake detection switch harness using the supplied relay connector.To vehicle's reverse lamp harnessTo car light control switchReveres sensor wire (Purple/White)For the sake of safety, be sure to connect the parking sensor. Dimmer control wire (Orange/White)When using the optional power amplifier, connect to its power control terminal.To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.TV tuner (Optional)Parking sensor wire (Light Green)Battery wire (Yellow)Ground wire (Black) - (To car chassis)FUSE ( 15A )Ignition wire (Red)If no connections are made, do not let the cable come out from the tab.Steering remote control input (Light Blue/Yellow) To steering remoteConnect to the terminal that is grounded when either the telephone rings or during conversation.Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.If no connections are made, do not let the cable come out from the tab.Mute wire (Brown)Motor antenna control wire (Blue)Power control wire (Blue/White)External amplifier control wire (Pink/Black)To connect the Kenwood navigation system, consult your navigation manual.Ignition key switchACCCar fuse box (Main fuse)BatteryCar fuse boxB54-4486_final.indd 4B54-4486_final.indd 406.9.14 5:18:35 PM06.9.14 5:18:35 PM
