在线浏览, 第4页, 建伍 Kenwood KDC-X7016 快速用户指南

4 | Quick Start Guide First step Exit Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. 1 Press the [VOL] knob to quit the demonstration mode when the messages “To Cancel Demo Press the volume knob” are displayed (approx. 15 seconds). 2 Turn the [VOL] knob to select “YES”, and then press the [VOL] knob. The demonstration mode can also be canceled in the Menu List mode. Refer to (page 31) of Instruction manual. Adjusting the Clock & Date 1 Press the [MENU] button to enter the Menu List mode. 2 The item can be selected and determined as follows. ”Settings” ➜ “Clock & Date” ➜ “Clock Adjust” To select the item, turn the [VOL] knob. To determine the item, press the [VOL] knob. 3 Press [ 4] or [¢] button to select hour or minute to set. 4 Turn the [VOL] knob to adjust the hour and minute. 5 Press the [MENU] button to finish the clock adjusting. 6 Turn the [VOL] knob to select “Date Adjust”, and then press the [VOL] knob. 7 Press [ 4] or [¢] button to select year, month, or date to set. 8 Turn the [VOL] knob to adjust the year, month, and date. 9 Press the [MENU] button to finish the date adjusting. 10 Turn the [VOL] knob to select “Date Mode select”, and then press the [VOL] knob. 11 Turn the [VOL] knob to select Date format, and then press the [VOL] knob. 12 Press the [MENU] knob for at least 1 second, and then press it again briefly to exit the Menu List mode. [MENU] [VOL] [ ¢] [ 4] B59-2012-00_00_FLIPQSG_M.indd 4 B59-2012-00_00_FLIPQSG_M.indd 4 09/12/17 14:07 09/12/17 14:07