4Before First Use (Priming the Pump)21435NOTIcE: Wash all removable parts in warm, soapy water. No parts may be washed in a dishwasher. The water pump must be “primed” before first use to work properly.Operating without water in the reservoir can permanently damage the appliance. Fill the removable water reservoir to the MAX fill line with cold water and replace securely on the back of unit.Plug in the unit and press the ON/OFF button to turn unit on. The amber ON light will illuminate.Turn the control knob to the STEAM setting. Steam will begin to flow from the steam nozzle.The ready light will glow green when the water is heated and unit is ready for use. Place an empty container under frothing nozzle in order to catch any drips of water from the steam nozzle.Allow steam to flow for about 2 minutes. NOTE: After the ready light initially glows green, the light may cycle on and off during operation.6Turn the control knob back to the STANDBY position.
