使用说明书在线浏览
![]()
3 E N Installing the Left Pedal and Pedal Pod 1 Apply a thin layer of grease on the pedal spindle threads ➊. 2 Insert the spindle into the crank arm ➋ . 3 Hand tighten the spindle. NOTE: The left pedal spindle has a left- handed (reverse) thread. 4 Use the pedal wrench to tighten the spindle. NOTE: Garmin ® recommends torque of 25 to 30 lbf-ft. (34 to 40 N-m). 5 Clean all excess grease from the spindle using a clean cloth and soapy water or isopropyl alcohol. 6 Place the pedal pod ➌ on the spindle. NOTE: You must carefully bend the cable ➍ out of the way. The pedal pod should be flat against the crank arm. TIP: Power and cadence calculations are not impacted by the orientation of the pedal pod. Garmin recommends placing the pedal pod on the leading edge of the crank. When the crank is
微信服务公众号
