在线浏览, 第3页, 宝齐莱 Carl F Bucherer PATRAVI SCUBATEC CHRONOMETER 使用说明书

EN G LISH | 7 6 | EN GLISH 3 1 2 1 PATR AVI SCUBATEC CFB 1950.1 4.6 mm / 4.8 mm 26.2 mm 25 / 26 500 m | 50 atm YOUR WATCH LEGEND TECHNICAL DATA Automatic movement Depth of the movement Diameter of the movement Number of jewel bearings Water resistance * * see the chapter on “Water resistance” The Patravi ScubaTec dives into new dimensions: The sturdy diving watch ensures pinpoint legibility with a diameter of 44.6 mm. The unidirectional rotatable bezel, with its 4-mm sapphire crystal and its automatic helium valve, offers func- tionality under extreme conditions. The striking timepiece with its stainless steel case is equipped with a highly-precise, chronometer-certified CFB 1950.1 automatic movement. Whether on land or water – the Patravi ScubaTec is certain to come up in style. SET TIME START THE WATCH The movement is wound by the motion of the wrist when worn. When not worn, the watch stops after approximately 38 hours and has to be wound manually. Rotating the crown in the counter clockwise direction will automatically release it to position 1. 2 Manually wind the move- ment by rotating the crown at least 30 times in the clockwise direction. In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time. Pull the crown until it is in position 3. The second hand does not move. Move the crown counter- clockwise until the date changes. Then deliberately set the current time either a.m. or p.m. Push the crown back into position 1. The second hand is back in motion. Crown Position 1: Position 2: Position 3: Winding Set date Set time Rotatable bezel Second Date 1 2 3