761 2 3the mechanism of the Patravi Evotec Powerreserve is based on the innovative cFB A1000 manufacturer calibre with a peripheral rotor. Measuring 43.75 × 44.5 mm, the cushion-shaped case of the timepiece has generous measurements. It includes a clearly set-up dial on which there is room for an innovative power reserve indicator, big date, day indicator and small seconds dial.Your watchcFB A1002Automatic movement6.3 mmDepth of the movement32 mmDiameter of the movement33number of jewel bearingsWater resistance(see the chapter on "Water resistance")Technical DataLegendsmall secondsPower reserveBig datePosition 1:Position 2:Position 3:crownWindingset date / day of the weekset timeDay of the weekthe movement is wound by the motion of the wrist when worn. When not worn, the watch stops after approximately 55 hours and has to be wound manually. Start the watchrotating the crown in the counter clockwise direction will automatically release it to position 1.rotate the crown clockwise until the power reserve indication hand has left the LoW area.In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time.Set timePull the crown until it is in position 3. the second hand does not move.rotate the crown clockwise until the date changes. then deliberately set the current time either a.m. or p.m.Push the crown back into position 1. the second hand is back in motion.311250 m (5 atm)2Patravi evotec powerreserveEnEn
