761 2 3the mechanism of the Patravi Evotec DayDate is based on the innovative cFB A1000 manufacturer calibre with a peripheral rotor. Measuring 43.75 × 44.5 mm, the cushion-shaped case of the Patravi Evotec DayDate has generous measurements. It includes a clearly set-up dial on which there is room for the day indicator and a big date, in addition to the small seconds.Your watchcFB A1001Automatic movement6.3 mmDepth of the movement32 mmDiameter of the movement33number of jewel bearingsWater resistance(see the chapter on "Water resistance")Technical DatacrownPosition 1:Position 2:Position 3:Windingset date / day of the weekset timeLegendthe movement is wound by the motion of the wrist when worn. When not worn, the watch stops after approximately 55 hours and has to be wound manually. Start the watchrotating the crown in the counter clockwise direction will automatically release it to position 1.Manually wind the move-ment by rotating the crown at least 30 times in the clockwise direction.In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time.Set timePull the crown until it is in position 3. the second hand does not move.small secondsBig dateDay of the weekrotate the crown clockwise until the date changes. then deliberately set the current time either a.m. or p.m.Push the crown back into position 1. the second hand is back in motion.3112250 m (5 atm)Patravi evotec daydateEnEn
