98In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time.Set timePull the crown until it is in position 3. the second hand does not move.Set month / dateWarning: Do not use the quick set function for the date between 8:00 p.m. and 2:00 a.m. because there is no assurance that the date will change at midnight after that; it may not change for another 24 hours.Pull the crown into position 2.1Press the crown against the case and simultaneously turn clockwise until it is firmly secured.the timepiece also has a precise chronograph with a flyback switch. this flyback mechanism allows one to quickly start a second time measurement while one is in progress. that makes it unnecessary to push the stop, reset and start buttons.Flyback functionWhile time measurement is in progress, push the P2 pusher to reset all the count-ers to zero. the next time measurement starts auto-matically. In order to put all the counters back to zero after that, press the P2 pusher with the chronograph function stopped.1the chronograph can be used to measure exactly 1/ 8 second time intervals for up to 6 hours. the time measured can be read using the second, minute and hour counters.Measure time (chronograph)start measuring time using the P1 pusher. the seconds counter is in motion.1to stop measuring time, press the P1 pusher again and read where it stopped.2Move the crown counter-clockwise until the date changes. then deliberately set the current time either a.m. or p.m.Push the crown back into position 1. the second hand is back in motion.3rotate the crown counter-clockwise. set the current month, then the current date.232EnEn1
