在线浏览, 第3页, 宝齐莱 Carl F Bucherer PATRAVI CHRONODATE 使”¨说明书

EN G LISH | 7 6 | EN GLISH 1 2 3 3 1 2 2 1 PATR AVI CHRONODATE CFB 1956 7.3 mm 30 mm 49 50 m | 5 atm YOUR WATCH LEGEND TECHNICAL DATA Automatic movement Depth of the movement Diameter of the movement Number of jewel bearings Water resistance * * see the chapter on “Water resistance” For the Patravi ChronoDate with its exquisite automatic movement, the watchmakers of this traditional business in Lucerne have come up with a special type of indication. The current day shows up on a large dial section. Along with the chronograph functions set off brightly at 3, 6 and 9 o’clock, the functions are symmetrically arranged and contribute to the perfect legibility of the dial. SET TIME START THE WATCH The movement is wound by the motion of the wrist when worn. When not worn, the watch stops after approximately 42 hours and has to be wound manually. Rotating the crown in the counter clockwise direction will automatically release it to position 1. Manually wind the move- ment by rotating the crown at least 30 times in the clockwise direction. In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time. Pull the crown until it is in position 3. The second hand does not move. Move the crown counter- clockwise until the date changes. Then deliberately set the current time either a.m. or p.m. Push the crown back into position 1. The second hand is back in motion. P1: P2: Big date Small seconds Start / stop chronograph Reset chronograph Crown Position 1: Winding Position 2: Set date Hours counter Seconds counter Minutes counter Position 3: Set time P1 P2