在线浏览, 第3页, 宝齐莱 Carl F Bucherer PATRAVI AUTODATE 使用说明书

EN G LISH | 7 6 | EN GLISH 1 2 3 3 1 2 2 1 PATR AVI AUTODATE CFB 1950 4.6 / 4.8 mm 26.2 mm 25 / 26 50 m | 5 atm CFB 1963 4.8 mm 28.6 mm 25 / 26 50 m | 5 atm Position 1: Position 2: Winding Set date Position 3: Set time Crown Second Date YOUR WATCH LEGEND TECHNICAL DATA Automatic movement Depth of the movement Diameter of the movement Number of jewel bearings Water resistance * * see the chapter on “Water resistance” The Patravi AutoDate displays the date and time in stream- lined elegance. Set in a classic round case and made more refined with exquisite materials, the timepiece stands for stylish understatement. The Patravi AutoDate is available in various configurations with different sizes associated with them. SET TIME START THE WATCH The movement is wound by the motion of the wrist when worn. When not worn, the watch stops after approximately 38 hours and has to be wound manually. Rotating the crown in the counter clockwise direction will automatically release it to position 1. Manually wind the move- ment by rotating the crown at least 30 times in the clockwise direction. In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time. Pull the crown until it is in position 3. The second hand does not move. Move the crown counter- clockwise until the date changes. Then deliberately set the current time either a.m. or p.m. Push the crown back into position 1. The second hand is back in motion.