EN G LISH |76 | EN GLISH123121MAN ERO AUTODATECFB 19504.6 / 4.8 mm26.2 mm25 / 2630 m | 3 atmCFB 1965 3.6 mm26.2 mm21 / 2530 m | 3 atmCFB 19634.8 mm20 mm25 30 m | 3 atmPosition 1:Position 2:Set dateSet timeCrownDateSecondYOUR WATCHLEGENDTECHNICAL DATAAutomatic movementDepth of the movementDiameter of the movementNumber of jewel bearingsWater resistance ** see the chapter on “Water resistance”The classic design of the Manero AutoDate emphasizes the functionality of the timepiece, presenting the important information at a glance: the current time and the date at 3 o’clock.SET TIMESTART THE WATCHThe movement is wound by the motion of the wrist when worn. When not worn, the watch stops after at least 38 hours and has to be wound manually. Manually wind the move-ment by rotating the crown at least 30 times in the clockwise direction.In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time.Pull the crown until it is in position 2. The second hand does not move.Move the crown until the date changes. Then delib-erately set the current time either a.m. or p.m.Push the crown back to the initial position. The second hand is back in motion.
