Preparing the Scanner3EnglishPreparing the ScannerUnlocking the Scanner1Peel the seals off the scanner.2Slide the lock switch on the bottom of the scanner toward the unlock mark (). Connecting the Scanner1Connect the scanner to your computer with the supplied USB cable.2Connect the supplied AC adapter to the scanner, and then plug in.• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.• Handle the scanner with both hands. Be careful not to drop the scanner.• Always lock the scanner when carrying or transporting it.• When locking the scanner, do not lift up the back and tilt the front (scanner button location) downward. You may be unable to set the lock.• Only use the USB cable and the AC adapter provided with the scanner. Use of other cables or adapters may lead to a malfunction.• When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The scanner operates in this condition without problems.• The scanner does not have a power switch. The power is activated as soon as the AC adapter is plugged in.Unlock Mark
