质量管理体系 要求GB/T 19001-2016 7.1.5.2 测量溯源 中英文对照
质量管理体系 要求GB/T 19001-2016 7.1.5.2 测量溯源中英文对照
7.1 资源
更新日期：2024-07-19
7.1.5.2 测量溯源
当要求测量溯源时，或组织认为测量溯源是信任测量结果有效的前提时，测量设备应：
- 对照能溯源到国际或国家标准的测量标准，按照规定的时间间隔或在使用前进行校准和（或）检定（验证），当不存在上述标准时，应保留作为校准或检定（验证）依据的形成文件的信息；
- 予以识别，以确定其状态；
- 予以保护，防止可能使校准状态和随后的测量结果失效的调整、损坏或劣化。
当发现测量设备不符合预期用途时，组织应确定以往测量结果的有效性是否受到不利影响，必要时应采取适当的措施。
7.1.5.2 Measurement traceability
When measurement traceability is a requirement, or is considered by the organization to be an essential part of providing confidence in the validity of measurement results, measuring equipment shall be:
- calibrated or verified, or both, at specified intervals, or prior to use, against measurement standards traceable to international or national measurement standards; when no such standards exist, the basis used for calibration or verification shall be retained as documented information;
- identified in order to determine their status;
- safeguarded from adjustments, damage or deterioration that would invalidate the calibration status and subsequent measurement results.
The organization shall determine if the validity of previous measurement results has been adversely affected when measuring equipment is found to be unfit for its intended purpose, and shall take appropriate action as necessary.
