2GBWARNINGTo prevent fire or shock hazard, do notexpose the unit to rain or moisture.To prevent fire, do not Cover the ventilation of theapparatus with news papers, table-cloths, curtains,etc. And don’t place lighted candles on the apparatus.To prevent fire or shock hazard, do not place objectsfilled with liquids, such as vases, on the apparatus.This appliance is classifiedas a CLASS 1 LASERproduct. The CLASS 1LASER PRODUCTMARKING is located onthe rear exterior.Don’t throw a battery, dispose it asthe injurious wastes.Do not install the appliance in a confined space, suchas a bookcase or built-in cabinet.This amplifier incorporates Dolby* Digital and ProLogic Surround and the DTS** Digital SurroundSystem.* Manufactured under license from DolbyLaboratories.“Dolby”, “Pro Logic” and the double-D symbol aretrademarks of Dolby Laboratories.** “DTS” and “DTS Digital Surround” are registeredtrademarks of Digital Theater Systems, Inc.TipThe instructions in this manual describe the controlson the amplifier. You can also use the controls on thesupplied remote if they have the same or similarnames as those on the amplifier. For details on the useof your remote, see pages 31–34.Demonstration ModeThe demonstration will activate the first time youturn on the power. When the demonstration starts,the following message appears in the displaytwice:“NOW DEMONSTRATION MODE IF YOUFINISH DEMONSTRATION PLEASE PRESSPOWER KEY WHILE THIS MESSAGEAPPEARS IN THE DISPLAY THANK YOU”To cancel the demonstrationPress ?/1 to turn the amplifier off during theprevious message. The next time you turn theamplifier on, the demonstration will not appear.To view the demonstrationHold down SET UP and press ?/1 to turn on thepower.Notes• Running the demonstration will clear theamplifier’s memory. For details on what will becleared, see “Clearing the amplifier’s memory”on page 13.• There will be no sound when the demonstrationmode is activated.• You cannot cancel demonstration if you did notpress ?/1 while the above message is beingdisplayed. To cancel demonstration after theabove message appears, press ?/1 twice toactivate the demonstration again. Then, press?/1 while the above message is beingdisplayed.
