98Push the crown back to the initial position. the second hand is back in motion.In order for the date to properly move at midnight, the hour hand must intentionally be set to a.m. or p.m. based on the current time.the concept of the calendar mechanism requires that the day of the week be entered, followed by the date.Set timeSet day of the weekIntentionally set the current time at a.m. or p.m. by rotating the crown.Pull the crown until it is in position 2. the second hand does not move.set the current day of the week by rotating the crown counterclockwise. then set the current time.Set the dateSet the 24-hour indicationthe second time zone must not be set directly after the time is set if the minute hand is being pushed counterclockwise. You should wait about 30 minutes to set the second time zone.use a corrector pin to press corrector A repeatedly until the hand is on the desired hour.Pull the crown into position 1.set the current date by rotating the crown counter-clockwise.Push the crown back to the initial position.21211312EnEn
